Bocal do preço do custo em branco do carboneto de tungstênio para a venda

N ° de Modelo: oem Tamanho: Pequeno Tipo: Rolamento Certificação: SGS Marca Registrada: lipai Especificação: SGS Código HS: 8207209000 Impressão de Logotipo: Sem Impressão de Logotipo Personalizado: Personalizado Material: Metal Tamanhos: Qualquer Tamanho do Pacote de Transporte: Papel, Madeira, Origem Plástica : Hunan Zhuzhou A série de nossos produtos de carboneto de tungstênio de fabricação são pontas de serra de carboneto, dicas de corte e inserções de hastes de carboneto, blanks, materiais para matrizes e moldes, matrizes de desenho, cabeçotes a frio e puncionadeira, pastilhas intercambiáveis, fresas de metal duro, carbeto ferramentas de mineração, tiras de metal duro e placas, e etc & period; Podemos oferecer produtos de carboneto não padrão de acordo com desenhos e especificações dos clientes e período; \ n \ nO grau de material inclui: K10 K20 K30 K40 YG10 YG10 YG10 YG10 YG10 YG20 YG20 YG25 YG25c e assim por diante e período; \ n \ nNossa especialidade veja abaixo & período; n1 e período; Sinterizado no forno HIP \ n2 & period; Alto desgaste e resistência à corrosão e abrasão \ n3 e período; Várias notas, tipos \ n4 e período; Qualidade estável

Grade/ Properties / Application
Grade	Equal to ISO Category Number	Performance			Performance&application recommended
		Density	Bend Strength	Hardness
		G/Cm 3	N/mm 2	HRA
YG3	K01	14.9-15.3	≥1180	≥90.5	Sand-blasting nozzles qualified for fine turning and half-fine turning when cast iron, non-ferrous metal, alloys as well as non-alloy materials cutting consecutively. Can make wire drawing of steel and non-ferrous metal. Also qualified for sand-blasting n
YG3X	K01	15.1-15.4	≥1300	≥91.5
YK05		14.95	2500	90.5	Mostly used as the buttons of small and bits medium sized percussion
YG8C		14.8	2400	88.5	and as the inserts of rotary prospecting bits to cut soft  and
					medium hard formations.
YG6		14.95	1900	90.5	For  coring crowns,electric coal drill bits, coal cutting picks,oil
					cone bits and scraping knife bits,used in coal geological  prospecting,
					mining and oil well boring.
YG6X	K10	14.8-15.1	≥1560	≥91.0	Qualified for machining of chilled cast iron, alloy cast iron, refractory steel and alloy steel. Also Qualified for the machining of common cast iron.
YG6A	K10	14.7-15.1	≥1580	≥91.0
YG6	K20	14.7-15.1	≥1670	≥89.5	Qualified for finish machining and semi-finish machining for the cast iron, non-ferrous metal, alloy and unalloyed materials. Also qualified for wire drawing for the steel and non-ferrous metal, electric drill for geology use and steel drill etc.
YG8	K30	14.6-14.9	≥1840	≥89	Qualified for rough machining of cast iron, non-ferrous metal, nonmetal materials, drawing of steel, non-ferrous metal and pipes, various drills for geology use, tools for machine manufacture and wearing parts.
YG10X		14.5	2400	91.5	Fine grain alloy, good wear resistance,Used for processing hard
					wood, veneer board,PCB,PVC and metals.
YG11		14.4	2600	88.5	Forming or stamping dies for metal powders and nonmental powders.
YG11C	K40	14.4	2700	86.5	Largely for the inserts and buttons of percussion bits and tricone bits to cut medium
					hard, hard and very hard formations.
YG15	K40	14	2800	87.5	For fabricating drawing dies of steel tubesand rods under high
					compressibility ratio;punching,stamping,forging tools under large stress.
YG15C		14	3000	85.5	For oil cone dril bits, for medium soft and medium-hard rocks.
YG16C		13.9	2900	85.5	Impact resistance, hot&forging  dies etc.
YGH40		13.5-13.9	≥2450	≥83.0	Mainly for making hot dies.
YG20		13.5	3200	85.5	For fabricating of stamping dies for watch parts, spring plates of musical
					instruments, battery jars,small sized steel balls,screws,screw caps.
YG18C		13.7	3100	84.5	Impact resistance forging dies,hot-press forging dies and rollers.
YG20C		13.5	3300	83.5	Dies for wear resistant or impact resistant application.
YG22C		13.3	3500	83	Nut forming dies and high impact resistance forging dies.
YG25C		13.1	3600	82.5	Stainless bolt header dies and rollers.
YT15	P10	11.1-11.6	≥1180	≥91.0	Qualified for rough machining, semi-finish machining and finish machining during consecutive machining of carbon steel and alloy steel.
YT14	P20	11.2-11.8	≥1270	≥90.5	Qualified for rough machining for rough face of carbon steel and alloy steel, half process during discontinuity cutting.
YT5	P30	12.5-13.2	≥1430	≥89.5	Qualified for rough machining for rough face of carbon steel and alloy steel and discontinuity cutting.

Grupo de Produto : Bico de Metal Duro